PA 2200
19" Multi-Channel Amplifier

 
Key Features
  • 2-channel digital amplifier
  • 2 × 200 watts or 1 × 400 watts
  • VCA inputs per channel
  • Signal, limit, protect LEDs per channel
  • Stand-by- and fault contact
  • Controlled super silent fans
  • Cabinet 1 U, installation depth only 345 mm
  • Optional 100 V transformer
  • Optional extern volume control
    (Wall panel WP-V or rack panel RP-V)
  • Optional DV module for extern volume
    control via UP/DOWN contacts
Fields of Application
  • Home audio
  • Media rooms
  • Conference rooms
  • Shops, sales rooms
  • Gastronomy
  • Clubs, discotheques
  • Concert halls, theatres
  • Churches
Description

Our PA series of multi-channel power amplifiers comprises sophisticated class D amplifiers designed for use in AV systems, multi-room systems and multi-channel public address systems. They deliver outstanding sound quality with low levels of heat build-up and are equipped with almost completely silent, temperature-controlled fans. Integrated peak limiters prevent distortion with input levels of up to 26 dBu. To enable remote control, the amplifiers are equipped with an ON/OFF contact and VCA inputs with separate channels for external volume control.

The amplifiers can be controlled individually or in groups using the WP-V and RP-V volume controllers or the DV module and UP/Down contacts. The front features LEDs for signal, limit and protect as well as gain controllers for each channel, and bridge LEDs for each channel pair. Protect mode is triggered for any of the power amplifier channels via the isolated fault contact. The device is connected to the mains via a cold device cable. The inputs are equipped with IN and THRU XLR terminals. Two channels can be operated respectively in stereo, parallel or in a bridge. The speaker outputs are equipped with pluggable, screw-type terminals for cable cross sections up to 2 × 4 mm².

Technical Data
Inputs2 × LINE IN and THRU, symmetric; XLR
Nom. input+ 4 dBU
Max. input+ 22 dBU
Input impedance20 kohms
Load impedance≥ 2 Ohm / Bridge ≥ 4 Ohm
Outputs2 × speaker out up to 2 × 4 mm², (screw-type terminals, pluggable)
Output power
4 ohms
8 ohms
2 ohms
Bridge

2 × 200 watts
2 × 120 watts
2 × 200 watts
1 × 400 watts (4 or 8 ohms)
Frequency range30 Hz – 30 kHz (- 3 dB)
THD< 0,05 % (1 kHz, 3 dB at full power)
Dynamic range> 100 dB
DisplaysLED´s for power, signal, limit, fault and bridge
ControlsGain controls at front, DIP-switch at back: stereo/parallel/bridge, ground-lift
Additional
connectors
VCA inputs 0 – 10 V for each channel (also for DV-modules), floating fault contact (N/O), standby contact (N/O or N/C)
CoolingSilent running, regulated fans, air flow from front to back
Protective circuitsShort circuit and overtemperature protection, inrush current limiter. Peak limiter, current limiter and power limiter for each speaker output
Power supply230 VAC
Mains connectorIEC connector
Power consumption

Standby

Idle state

Nominal power

Maximum


0.5 watts

24 watts

80 watts

200 watts

Dimensions
(W × H × D)
19", 1U,
483 × 44 × 348 mm
Weight8.1 kg
Warrenty3 years
 
Accessories

WP-V

RP-V

Wall panel

(volume + mute)

Rack panel

(volume + mute)

DV Module

Digital volume control

via UP/DOWN contact

PA-T 200

100 V transformer

200 watts toroidal core

PA-T 1U

Rack cradle 19"

1U for 2 × PA-T 200