PA 6100 DSC
19" Multichannel DSP Amplifier

Key Features
  • Digital multichannel amplifier with DSP
  • 8 × 8 DSP matrix
  • 8 × line IN, 6 × speaker OUT + 2 × line OUT sym.
  • 6 × 100 watts or 3 × 200 watts
  • USB and Ethernet interfaces
  • VCA inputs per channel
  • Standby and fault contact
  • Silent running regulated fans
  • 1U chassis, installation depth only 345 mm
  • Optional 100 V transformer
  • Optional extern volume control
    (Wall panel WP-V or rack panel RP-V)
  • Optional DV module for extern volume control via UP/DOWN contacts
Fields of Application
  • Home audio
  • Media rooms
  • Conference rooms
  • Shops, sales rooms
  • Gastronomy
  • Clubs, discotheques
  • Concert halls, theatres
  • Churches

The PA 6100 DSC is a sophisticated class D multichannel amplifier with an integrated 8 × 8 DSP matrix. It delivers outstanding sound quality with low power consumption and low levels of heat generation. The amplifier comprises 8 symmetrical inputs and 8 outputs. OUT 1 – 6 are speaker outputs each with 100 watts power . OUT 7 – 8 are symmetrical LINE OUTs. Single or multiple amplifiers in the PA-DSC series can be connected via Ethernet or USB, programmed using the DSC Control software and a PC, and operated using a media control system.

In addition to the 8 × 8 mixer matrix, the DSP also offers ten fully parametric filters, a delay of up to two seconds, and compressors and limiters for each input and output. We can also preconfigure project-specific settings on request.

The highly efficient, class-D power amplifier modules in the PA DSC series are equipped with complex limiters that guarantee stable, distortion-free operation even with low load impedances. To enable remote control, the amplifiers are equipped with an ON/OFF contact and VCA inputs with separate channels for external volume control. All outputs can be controlled individually independently or in groups using our WP-V and RP-V volume controllers or the DV module and UP/Down contacts.

Any fault in the power amplifier channels is signaled via the isolated fault contact. Inputs 1 – 4 are set up as XLR terminals. The remaining inputs and outputs are equipped with pluggable screw-type terminals.

Technical Data
Inputs8 × line IN symmetric
(4 × XLR; 4 × screw-type terminals, pluggable)
Nom. input/
output level
+ 4 dBU
Max. input/
output level
+ 22 dBU
Input impedance20 kOhm
Load impedance≥ 2 Ohm / bridge ≥ 4 Ohm
Outputs6 × speaker OUT up to 2 × 2.5 mm²,
2 × Line OUT sym.,
screw-type terminals, pluggable
Output power
4 ohms
8 ohms
2 ohms

6 × 100 watts
6 × 60 watts
6 × 100 watts
3 × 200 watts (4 or 8 ohms)
Frequency range10 Hz – 20 kHz
THD< 0,05 % (1 kHz, 3 dB below full power)
Dynamic range> 100 dB
DisplaysLEDs for power, signal, limit, fault, LCD-display
ControlsPreset selector, power switch, ground-lift
DSP24 bit, 48 kHz
Latency0.64 ms
Functions8 × 8 matrix mixer, 10 parametric filters for each input/output. bell, high shelf, low shelf, notch, all-pass, band-pass, high-pass, low-pass. Delay up to 2 sec., limiter und compressor for each input/output, 100 presets
SoftwareDSC Control
InterfacesUSB, Ethernet
VCA inputs 0 – 10 V for each channel
(also for DV module)
Floating fault contact (N/O)
Stand by contact (N/O or N/C)
CoolingSilent running, regulated fans, air flow from front to back
Protective circuitsShort circuit and overtemperature protection, inrush current limiter. Peak limiter, current limiter and power limiter for each speaker output
Power supply230 VAC
Mains connenctorIEC connentor
Power consumption
1/8 th power

0.5 watts
32 watts
125 watts
310 watts
(B × H × T)
19", 1 U,
483 × 44 × 348 mm
Weight8.8 kg
Warrenty3 years
Data sheet (PDF)


Wall panel (volume + mute)
Rack panel (volume + mute)

DV module
Module for digitale volume control via UP/Down contacts
DSC Control
Professionelle Steuerungs-Software für System-­Controller und Controller-Endstufen. Schnittstellen:Ethernet, USB; Betriebssysteme: Windows, Mac OS; Download von unserer Website –